Slatpanel® Black Colour Acoustic Slat Wall Panels

Each box contains two panels measuring 240cm x 32cm. These panels will join next to each other seamlessly with no join line showing.

We value your time and aim to get your order to you as quickly as possible. All of our wall panels are held in stock in our warehouse and are shipped within 48 hours of receiving the order. If a product is on pre-order, this will be clearly stated on the product page so you can plan accordingly.

We're proud to offer free, nationwide shipping across Canada for our wall panelling range. Whether you're located in Toronto, Ottawa, Calgary, or anywhere in between, we've got you covered.

At WVH®, you have 30 days to return your wall paneling order, provided the box remains unopened. To initiate a return or exchange, please contact our customer service team, who will guide you through the process. Ensure you have your order number and details handy for a smooth procedure. You can read our full return policy here.

Depending on the surface, the installation method may vary. Here are a few ways we recommend installing our panels:

• Gluing straight onto the wall:
  A grab adhesive is recommended for this approach.
• Screwing directly onto your surface:
  Depending on the backing color, use either black screws for black backing or silver or grey screws for grey backing. We recommend a minimum of nine screws per panel at regular intervals across the width and length of the panel. If installing onto ceilings, ensure the panels are screwed into ceiling joists. Please use the appropriate fixings for your surface.
• Screwing into timber batons:
  This is a great option if you want to optimize the sound insulation properties of the panels, or need the space to hide wiring or pipework. For optimum sound absorption, we recommend screwing 45mm timber batons to the wall, and attaching the panels to the batons. Adding a sound absorption insulation product behind the panels will improve this further.

You can install the panels on any surface, including brick, concrete, and plasterboard.

The panels are designed for interior use only.

Of course! The panels can be installed in these areas, as long as they are not in direct contact with water. We recommend, where possible, applying a water-resistant finish to the front of the slats to give them an extra layer of protection.

The panels have been designed to have the edge exposed, but you can always trim off the excess felt to have a flush finish. The slats are the same color throughout, so a cut edge will look like the rest of the panel, without any extra steps.

It's straightforward to install around sockets and other wall-mounted fixtures. You can cut through the slats with a sharp saw, and the felt with a sharp blade, like a utility knife, to get a snug fit around your sockets and windows.

You can! If you need access to the wiring, we recommend installing them on wooden battens where possible.

We offer a range of standard sizes that cater to the needs of most projects, which you can select from our size drop-down. The panels are designed to be easily cut down to size if required. They also join together seamlessly if you need to fill a larger area.

We do not currently offer bespoke sizes and designs, but if you have any specific requirements, or are looking to bulk order, please contact our customer service team for more information.

The finish available is a satin oil professionally applied to give an even coating across the panel.

Use a microfibre cloth to wipe off any surface dust from the panels. To remove any scuffs or marks, use a damp cloth to remove them with ease.

Absolutely! We believe in the quality of our products and want you to be 100% confident in your choice. Visit our dedicated samples page to purchase your sample pack today.