We recommend either screwing the panels straight into the wall, using the correct fixings, through the acoustic felt or if you are looking to increase the sound properties further, screwing them into batons. If installing on ceilings, the panels can be screwed straight into ceiling joists.
Measure the wall
Mark the cutting lines on the panel with a pencil and tape.
Use a fine tooth saw to cut the panel along the marked line.
Sand the cut edges of the panel until smooth.
Attach the panel to the wall. Hold the panel in place on the wall.
Drill holes through the black felt into the wall.
Repeat the process for a fuller wall of panels.
Discover the latest transformations with some inspiring projects from our social media community.
Great all around experience. The material arrived quick with no damage and feels of great quality. The install was extremely easy, I got the black background and used black drywall screw. You can’t even see the screws.
I would like to personally thank the entire team at WVH for the amazing support as well as the outstanding product that they delivered to ensure that our project was successful. I look forward to working with WVH on many more projects to come!
These far exceeded my expectations! This wood is absolutely gorgeous — and the acoustical paneling it sits on had the effect of bringing some additional insulation to the room. The end effect was both beautiful — and quieter! It elevated the entire space. Outstanding.
I absolutely love this company. Their products are amazing, customer service is top notch. I will recommend them again and again!
Just got done building a podcast studio and the panels really make the whole look. They were incredibly easy to put up. We love them and will for sure be ordering more!
Each box contains four panels. These panels will join next to each seamlessly with a tongue and groove style system.
We have designed the panels to join both width-ways and long ways seamlessly so any length or width can easily be achieved.
Transform your space with our easy-to-install mosaic wall panels. Here's a simple step-by-step guide to help you achieve a flawless installation.
Step 1: Preparation
Ensure that the area where you plan to install the tambour panel is clean, dry, and free from obstructions.
Step 2: Gather Necessary Materials
You will need a strong adhesive glue for the installation. Optionally, a nail gun can be used for additional reinforcement.
Step 3: Glue Application
Apply an even layer of the adhesive glue on the back of the tambour panel. Make sure the edges and corners are well covered for optimal adhesion.
Step 4: Positioning the Panel
Carefully place the panel onto the desired spot, pressing firmly to make sure the glued surface makes full contact with the wall.
Step 5: Optional - Nail Gun Reinforcement
For extra security, you may use a nail gun to affix the panel onto the wall. This step is optional and depends on the type of wall and your preference.
Step 6: Clean Up
Immediately after installation, clean any excess glue that may have seeped out from the sides of the panel using a damp cloth.
Step 7: Drying Time
Allow ample time for the glue to dry completely. Refer to the adhesive manufacturer's instructions to know the recommended drying time.
Step 8: Repeat for Remaining Panels
Follow the same process for each panel, ensuring a proper alignment between panels for a seamless finish.
The panels are all in stock, so delivery takes 5-10 days. If we do have to wait for a new production run then it can be 2-3 weeks but please get in contact at the point of order, and we can confirm this right away.
We do not currently offer the panels in custom sizes; however, we have designed them to be easily cut if you need smaller. They also join together seamlessly if you need bigger.
The panels will be absolutely fine in these areas as long as they are not in direct contact of water.
Our mosaic wall panels are designed for indoor and outdoor use.
It is straightforward to adjust the panels to fit around any object. You can cut the slats with a saw to then apply around any item you may have on your surface.
You can mount the panels on all flat surfaces including brick, concrete and plasterboard.
If installing with batons, then you can use mineral wool or other sound insulation material in-between the gaps which will increase the sound properties.
You can return unused panels within 30 days after delivery.
Our team is on hand from Monday to Friday, 9am to 5pm EST, to answer any questions. Give us a call on 03 7044 1911, email us or start a live chat.
Immerse yourself in the world of natural wood mosaic panels, a mainstay of interior design. With meticulously crafted natural wood mosaics, these panels exude sophistication, bringing timeless charm to both commercial and residential environments.View full stereo range
Experience the impressive fusion of aesthetics and durability in natural wood mosaic panels. Their unique texture, combined with the robustness of select premium wood styles, makes them a preferred choice for diverse design projects, standing the test of time gracefully.Shop samples
Witness the transformative potential of mosaic panels. Whether incorporated in a contemporary retail boutique or a comfortable residential kitchen, these panels blend seamlessly with existing decor, significantly enhancing the visual appeal and demonstrating their versatility.Installation guide